Step 1 of 4
Application Requirements
Define the mechanical requirements: output force or torque, operating speed, duty cycle, and environmental conditions.
Actuator Type
Linear (Cylinder)
Push / pull motion. Hydraulic cylinder extends and retracts.
Rotary (Motor)
Continuous rotation. Hydraulic motor drives shaft.
Force & Speed Parameters
N
mm/s
mm
cyc/h
Operating Conditions
%
RPM
Environment & Temperature
°C
°C
Step 2 of 4
System Design Parameters
Adjust the target operating pressure. All system parameters recalculate in real time.
Target System Pressure
200
bar
System Pressure
50 bar100 bar200 bar320 bar480 bar
⚙️ Adjust pressure to determine optimal pump type
Cylinder Bore
—mm
Required bore diameter
Flow Rate (max)
—L/min
At operating speed
Pump Power
—kW
Including 85% sys. efficiency
Pump Displacement
—cc/rev
At drive speed
Heat Generation
—kW
At duty cycle
Reservoir Volume
—L
3× pump flow rule
Step 3 of 4
Component Selection
Catalog-matched components based on your calculated parameters. Select one per category.
Step 4 of 4
System Summary
Complete hydraulic system specification with schematic, bill of materials, and design notes.